Interior Fit
We regularly carry out custom joinery, woodwork and cabinet making on a range of boats and yachts, from general maintenance and repair to upgrades and improvements.
We can repair or make new internal cabins and cupboards, bulkheads, floors and other wooden parts.
Some of our recent work includes two new control panels, replacement of a rotten bulkhead, a custom teak dashboard and a variety of floors including holly / teak and synthetic.
See below for some examples of our latest interior fit work.
This gallery contains 7 photos.
We were approached by a yacht owner who was fed up with their old “80’s style” heads. We discussed options and agreed to replace the interior with new a formica finish and re-do the doors with new curved teak edges: The owner was delighted with the professional, fresh and modern-looking …
Continue reading
This gallery contains 3 photos.
Raven is a Sweden Yachts 390 that was brought in over the winter of 2017 / 2018 for a significant restoration. The teak deck was in a poor state, as was some of the interior, so the owners asked us to replace the deck and sole, as well as commissioning …
Continue reading
This gallery contains 12 photos.
We have just finished a major overhaul of Harmony, a Najad 361. She has been fitted with a brand new teak deck, as well as a new bow thruster with a fish eye. We also stripped the undersides and have applied Coppercoat as well as undertaking some repairs below the waterline. The cockpit timber work …
Continue reading
This gallery contains 6 photos.
Here is Christy, a Hylas 44 to which TLC custom fitted a new teak deck. Take a look at the before and after pictures to make this old lady new again. Due to the length, all deck handles were hand made as well as all the coach roof nosings. Not only is TLC …
Continue reading
This gallery contains 2 photos.
We recently completed the design, construction and fitting of a new control panel for Mahalo. The original control panel was too close to the hull, leaving too little space to install devices behind. It also only had a very small door that made it very difficult to gain access behind …
Continue reading
This gallery contains 9 photos.
Inlaying the Oyster logo into a saloon table TLC Boat Repairs took on the challenge of restoring an old saloon table that had seen better days, and incorporated the Oyster logo into the table. It went from an eyesore on the boat to a feature. We were amazed by the craftsmanship and …
Continue reading
We regularly carry out custom joinery, woodwork and cabinet making on a range of boats and yachts, from general maintenance and repair to upgrades and improvements.